The minimum value the scale can measure.
The divisions of our products including: 0.005g、0.01g、0.02g、0.05g、0.1g、0.2g、0.5g、1g、2g、5g、10g、20 g、50g、100g、200g、500g、1kg、2kg.

Capacity / division (The maximum value / the minimum value)
Example 1
300g * 0.005 resolution= 300.000g/0.005g= 60000
Example 2
15kg * 0.001kg resolution= 15.000kg / 0.001kg = 15000

The external analytical value of the scale.

The internal analytical value of the scale the external value is convert by the internal analytical value. E.g. if the range of internal value is 0~400,000, the eternal value is 1/6,000, its internal resolution is 400,000/6000=66.

The weight displays after weight calibration.
The range of external value the minimum value ~ maximum value.

Manual calibrate：Make the scale weight correctly through the adjustment from hardware.
Digits calibration：Make the scale weight correctly through the adjustment from software.

The linearity of load cell is lower than the resolution of the measurement so that we do multipule calibration to get close to the condition of non-linearity of load cell.

Usually, the material will change when the temperature change. At this moment the weight will also change. It can decrease the tolerance through temperature calibration.

The maximum capacity adds n-tupling division to ensure the range of maximum capacity can be measured. Usually it is the maximum capacity + 9E, but it is the maximum capacity + 9E in Hong Kong and Brazil.

kg, g, T, lb, lb. oz, oz, twg, tl.T, MM(JPN), tl.J(HONG KONG JEWELY TAEL) tl.H(HONG KONG TAEL), ct, dr GN, ozt, dwt, t(INDIA)